Platinum Or Palladium Wedding Rings? 7 Key Differences You Must KnowPlatinum Or Palladium Wedding Rings? 7 Key Differences You Must Know

Platinum Or Palladium Wedding Rings? 7 Key Differences You Must Know

If you’re looking for you or your partners wedding rings made from naturally white metals, other than silver, the decision comes down to either platinum or palladium. Yet, finding the key differences between platinum wedding rings and palladium wedding rings from a source you can trust is not easy.  

Here, I’m going to provide you the basic information, 7 key points, that allows you to compare the benefits and drawbacks between these two naturally white metals. After this you’ve read this article, you’ll be able to make an educated choice between a platinum and palladium wedding band. 

First, we’ll start with a bit of history to provide some context to later points about the physical properties of platinum and palladium wedding rings.   

1. History of Platinum and Palladium In Jewelry Production

Both platinum and palladium are considered among the rarest of metals on the earth's crust. Historically, palladium was discovered recently in the early 1800's, while platinum has been used by Pre-Columbian indigenous people in Central America, who made artifacts out of a platinum and gold compound. In Europe, platinum was first written about in the 1500's.

Palladium was first used in jewelry in 1939 to alloy platinum. Palladium is actually more rare than platinum and is found only in a few mines around the world. Though palladium has been used in jewelry production for decades, palladium wedding bands have become particularly popular over the past fifteen years.

In fact, since January, 2010, palladium has been officially recognized as a precious metal. Any palladium wedding ring more than a gram in weight is legally required to be hallmarked.

Both metals are part of what is considered the "platinum group", a collection of naturally white metals that also include osmium, rhodium, iridium, and radium.  

2. Comparative Weight of Platinum and Palladium Rings

Of all the naturally white metals, platinum is the heaviest (densest) of all the metals while platinum is the least dense and lightest of them. Consequently, palladium wedding rings will feel considerably lighter than platinum wedding rings if held in your hand.

Once you get the ring on the finger, however, it’s not likely you’ll notice the differences between the two metals. Overtime, the ring will just come to feel a natural part of your body.   

It is not that palladium is particularly light. For example, the weight of palladium wedding rings is comparable to 14K gold wedding rings, while platinum is about 75% heavier than 14K gold.

3. Color Comparison Between Platinum and Palladium Wedding Rings

Both platinum wedding bands and palladium wedding bands are comparable in whiteness. Most people viewing a platinum wedding ring next to a palladium wedding ring would have difficulty telling the difference.

These days, whiteness is determined by a color spectrophotometer developed by Gregtag Munsel, shown above.

Unlike white gold, which can vary according to the alloys used in the ring, palladium and platinum are pure natural white metals.

4. Hardness of Palladium and Platinum Wedding Rings

In terms of hardness, as shown above in the graph, both platinum and palladium are hard metals, even harder than 14K gold wedding rings.

On the MOH scale, platinum is rated at a 4 and palladium, a 5. However, when alloyed, platinum goes up to a 4.5 and palladium to a 5.75.

Just to give you some context as to what these numbers mean, the bottom of the scale is talc and at the top is diamond.

Your finger nail would rate at 2.5, the same hardness as pure gold or pure silver.

The difference in hardness between and platinum and palladium wedding band is not significant in context to wearing over your lifetime. Both are tried and true choices. 

5. Alloys In Platinum and Palladium Rings

However, these numbers in regard to hardness are only general estimates because alloy plays a role in hardness. How a particular precious metal is alloyed can be highly technical and proprietary.

Both platinum wedding rings and palladium wedding rings generally have 5% alloy. In the case of palladium, ruthenium is often used for 4.8% of the alloy, with trace amounts of copper or other components added in order to ease casting and fabrication. Platinum wedding rings are alloyed with ridium, rhodium and ruthenium.

Additionally, noble white qualities and relative affordability of palladium has made it one of the most popular alloys for white gold wedding rings, particularly for those who prefer a nickel-free white gold.

6. Wear and Tarnishing of Platinum and Palladium Wedding Rings

Both platinum wedding bands and palladium wedding bands will scratch, though palladium is about 10% more scratch resistant. Jewelers cleverly called the minute surface scratches a patina, Latin for "shallow dish".

When scratched, palladium and platinum tend to "furrow" rather than chip. The metal can simply be put back in place on a nonabrasive polishing wheel. The ring will look as shiny as when it came out of its box.

Both platinum and palladium are considered "noble metals" because they are naturally superior in their ability to withstand oxidation and corrosion.

Also, neither will tarnish, both are hypoallergenic and both will remain white forever.

7. Fabrication of Platinum and Palladium Wedding Rings

Both metals are fabricated using molds that can be created by hard carving wax or through computer-generated models on jewelry CAD programs. Unlike gold and silver, which can be molded and shaped by hand, both platinum and palladium are relatively brittle and therefore need to be cast out or dye struck.

Anything that can be made into platinum can also be made into palladium, or gold for that matter. 

8. Ethics of Palladium and Platinum Wedding Rings

The most ethical wedding and engagement ring are made from Fairtrade precious metals.  Several years ago, Fairtrade eco-platinum was coming out of the Ore Verde mine in Columbia but that mine has closed down. Only very small amounts of platinum are being processed as byproducts from Fairtrade gold mining and this material is not available.

The best option for anyone who cares about mining issues is to purchase a palladium or platinum wedding ring made of recycled metal. Using recycled metals does not mitigate the terrible damage from mining, but it is still better than buying newly mined metals on the open market.

9. Pricing of Platinum and Palladium Wedding Rings

Platinum wedding rings have been, for many years, the preferred and more popular choice for those wanting white-metal wedding ring. Platinum are the most expensive metal used in jewelry and therefore, has more status and brand cache.

Over the last few decades, however, more and more couples are choosing palladium. For many, the choice will come down to price. Palladium wedding bands run at about half the cost of platinum bands. They are simply more affordable.

Once on the finger, there is really little difference between how the two metals appear.  

by Jess Gantos
References and Bibliography
company designs and creates platinum wedding rings and palladium wedding rings Reflective jewelry is the first fairtrade jewelers in US.
Rated:NR/0 Votes
Add To My Article Reading List
Add To My Article Reading List
Print Article
More Article By Jess Gantos
More Article by Jess Gantos
More Articles From Shopping
More Articles From Shopping
Related Articles and Readings
Selecting The Right Kind Of Jewelry By: Elvina Jake
With the various visits to different jewelry shops tracking for that ideal item of jewelry can be challenging. But it doesn't have to be, if you know what you are looking for. ...
Why Chainmaille Jewelry Craft By: Matthew Woodbury
Jewelry is very prevalent, but jewelry that directly compliments your personal style or makes your statement for you perfectly is not prevalent. Find out some ways this is so with chainmaille jewelry. Discover a craft that ends up as a fine bracelet you will treasure for a long time to ...
Types Of Woman Jewelry By: Mariana Nikki
Jewelry has been defined as an ornamental item that is prepared from different types of precious substances like diamond, gold, gem stones, ruby, quartz, jasper etc. ...
Interested in Customized Jewelry? By: Simon Johnnson
How do you think jewelry became popular Jewelry was man's attempt to stand out of th crowd and make themselves ...
Taking a Look at Ancient Jewelry By: Simon Johnnson
Ornamental jewelry has existed ever since man learnt to be social beings They were created, as were tools to become inherent part of their ...
The information provided in this article and/or the comments is the sole responsibility of their respective authors and does not necessarily reflect the opinion of  does not endorse any article and/or comments published by our web users unless otherwise noted. 

Member Panel

login to submit articles and more


  • » Active Categories: 419
  • » Active Articles:252609
  • » Active Authors:31915
  • » Active Members: 38222
  • » Statistics Updated:
    - Thu May 7th, 2020 12:50AM EST