Violinmaking: Carving The ScrollViolinmaking: Carving The Scroll

The distinctive scroll found at the top of fine violins, violas and cellos is a purely decorative woodcarving that showcases the violinmaker’s skill as a maker and craftsman. The concept originated in the Baroque era. Typically the scroll carving is shaped like a volute, or rolled up spiral, but they historically also appeared as human or animal heads. The scroll is carved from the same block of wood that also includes the peg box.

First, a block of wood is resized to the widest and longest measures of the scroll and peg box down to where they meet the neck. A violinmaker will often use a template that illustrates the shape of the scroll from the side and the front. Once excess wood is removed, the template is traced and the outermost edges are cut in both dimensions using a band saw.

The volute is then traced onto the side and front view of the scroll. The saw follows the side tracing while turning the wood and only going as deep as the line on the front, stopping at the bottom of the scroll before it curves up again and cutting across. After that, using sandpaper as well as scrapers of various sizes, the rest of the spiral is carefully designed. Going around the center point, the spiral’s radius gets shorter, and the cuts are less deep with each turn.

Finally, chamfers, the curves about 2 mm deep between scroll layers, are added using a scraper. Two flutes are delicately scraped into the top of the scroll going down the back. Once the violinmaker finishes the scroll, the peg box and neck are shaped and the fingerboard is ready to be glued on. The peg holes are reamed and the neck is ready to be attached to the body of the stringed instrument.

While the shape of the scroll does not affect the sound or tone of the violin, it contributes greatly to the beauty of the instrument. Fancy, intricate scrolls are found mostly on fine violins, violas and fine cellos. Many modern makers specialize in scroll carving and are renowned for that skill.

by Nathan Weiss
References and Bibliography
Knowledge for fine violins and violinmaker click domain for more details.
Rated:NR/0 Votes
Add To My Article Reading List
Add To My Article Reading List
Print Article
More Article By Nathan Weiss
More Article by Nathan Weiss
More Articles From Music
More Articles From Music
Related Articles and Readings
Violinmaking: Designing the Sound Holes By: Nathan Weiss
The sound holes of stringed instruments such as fine cellos, violas and violins, also known as F-holes, are openings in the top plate. ...
Choosing the Tailpiece On a Stringed Instrument By: Nathan Weiss
The tailpiece anchors the strings on the bottom end of violins, violas and cellos. As the top of the strings are held in place by pegs in the peg box, ...
Violinmaking: Measuring and Fitting the Neck Piece By: Nathan Weiss
When crafting fine violins, as opposed to cheap, mass-produced ones, placing the neck onto the violin body is the most complex procedure ...
For Student Violins, Violas and Cellos, Proper Setup is Vital By: Nathan Weiss
It's prudent for the budding musician to begin with a student-model instrument. But progress can be stunted if the violin isn't properly setup by a professional. ...
The information provided in this article and/or the comments is the sole responsibility of their respective authors and does not necessarily reflect the opinion of  does not endorse any article and/or comments published by our web users unless otherwise noted. 

Member Panel

login to submit articles and more


  • » Active Categories: 419
  • » Active Articles:252609
  • » Active Authors:31915
  • » Active Members: 38222
  • » Statistics Updated:
    - Thu May 7th, 2020 12:50AM EST